abstract |
A: 1 - 99 Gew.-% eines teilchenförmigen Mikroemulsionspolymerisats mit einer Glasübergangstemperatur unterhalb von 0 °C und einer mittleren Teilchengröße unterhalb von 50 nm, B: 1 - 99 Gew.-% eines teilkristallinen Polymerisats B, insbesondere ausgewählt aus mindestens einem Polymeren von teilkristallinen Polyamiden, teilaromatischen Copolyamiden, Polyolefinen, Ionomeren, Polyestern, Polyetherketonen, Polyoxyalkylenen und Polyarylensulfiden, C: 0 - 50 Gew.-% eines Polymerisats ausgewählt aus einem teilchenförmigen Pfropfcopolymerisat mit einer mittleren Teilchengröße zwischen 60 und 10 000 nm, einem thermoplastischen Polyurethan, einem thermoplastischen Elastomer und einem Acrylat-, Dien-, EP-, EPDM- oder Siliconkautschuk, D: 0 - 50 Gew.-% Polycarbonate, und E: 0 - 50 Gew.-% faser- oder teilchenförmige Füllstoffe oder deren Mischungen. Molding composition containing, based on the sum of components A and B and, if appropriate, C, D and / or E, A: 1-99% by weight of a particulate microemulsion polymer with a glass transition temperature below 0 ° C. and an average particle size below 50 nm, B: 1-99% by weight of a partially crystalline polymer B, in particular selected from at least one polymer of partially crystalline polyamides, partially aromatic copolyamides, polyolefins, ionomers, polyesters, polyether ketones, polyoxyalkylenes and polyarylene sulfides, C: 0 - 50% by weight of a polymer selected from a particulate graft copolymer with an average particle size between 60 and 10,000 nm, a thermoplastic polyurethane, a thermoplastic elastomer and an acrylate, diene, EP, EPDM or silicone rubber, D: 0 - 50 wt .-% polycarbonates, and E: 0 - 50 wt .-% fibrous or particulate fillers or their mixtures. |